BioDOT Bioreactors
The BioDOT™ Bioreactor is designed for remediation of contaminated sites containing hydrocarbons, chlorinated hydrocarbons or a combination of both contamination components.
BioDOT™ Bioreactors by the utilization of individual, or selective combinations of its technologies, produce rapid contaminated soil and groundwater treatment to meet regulatory criteria.
BioDOT™ Bioreactors bioremediate contaminated soils and groundwater in Industrial, Commercial and Residential Sites; and Petrochemical and Petroleum processing plants including under buildings or foundation etc. Treatment technologies described on reverse.
• Mobile Computerized Bioreactors mean rapid set up on site
BTex and PHC Degradation Profile (Petro-Chemical Site)
BioDOT™ "Optional Tri-Phase" Treatment Technology for Hydrocarbon and Chlorinated Hydrocarbon Contaminated Sites
Bio DOT™ Aerobic technology Max-Oxtm oxygenation system
Aerobic reaction is the biodegradation of organic contaminants utilizing oxygen, as the electron acceptor. Oxygen is the primary limiting factor for most aerobic bioremediation. To remedy this, the BioDOT™ system utilizes its Max-Oxtm oxygenation system where dissolved oxygen is diffused into the water at concentrations greater than 110-ppm. and delivery of a customized microbial oxygenated solution directly to the plume area in the most efficient manner leads to fast and economical site remediations.
BioDOT™ Anaerobic technology
The BioDOT™ anaerobic technology addresses the critical parameters that control the efficiency of any in-situ reductive dechlorination process. In the dechlorination of chlorinated hydrocarbons using anaerobic reductive reactions, specific microbial solution with a customized substrate are injected into the contamination plume through the injection matrix.
![]() |
![]() |
![]() |
BioDOT™ Chemical Oxidation
The system is designed for the chemical oxidation of chlorinated hydrocarbons, in particular Perchloroethelynene (also known as tetrachloraethylene, perc, PCE), which is an organic compound that is part of a class of chemicals called chlorinated hydrocarbon solvents. Chemical Oxidation is an effective process for treating chlorinated hydrocarbons such as PCE in both soil and groundwater.
BioDOT Schematic Layout
Contaminants That Have Been Successfully Treated
|
Benzene Chlorobenzene Acrylonitrile Ethyl Benzene Dichlorobenzene Diesel fuels Toluene Napthalenes Biphenyl Xylene Fuels Oils 1-6 Chlorinated Phenols PHC F1-F4 Gasoline Marine Fuels |
Varsol Crude Oil Diethyleneglycol Perchloroethylene(PCE,TCE) Hydraulic Oils Pentane Dichlorethylene(DCE) Aromatics Cutting Oils Acenaphtene Fluoranthene Hexane/Hexene Alkylamine Oxides Phthalate Esters Isoprene |
Chloro Napthalene Chloroform Polycyclic Aromatics Cyanide Secondary Alkyl Benzene Mercaptan Heptane Nitrate Phenols Phenoxyacetates Monoalkylbenzenes Long chained Alkenes Methylene Chloride Jet Fuels Lubricating Oils Motor Oil |
Contact Us
704 Mara Street | Suite No. 201Point Edward, ON | Canada N7V 1X4
Tel: 519-337-0228 | Fax: 519-337-9178
Toll Free: 1.888.808.9782
Email: eng@blueh2o.ca


